A geometry is the spatial representation of a feature. More...

#include <qgsgeometry.h>

Classes
class	Error
Public Member Functions
	QgsGeometry ()
	Constructor.
	QgsGeometry (const QgsGeometry &)
	copy constructor will prompt a deep copy of the object
	~QgsGeometry ()
	Destructor.
int	addPart (const QList< QgsPoint > &points)
	Adds a new island polygon to a multipolygon feature.
int	addRing (const QList< QgsPoint > &ring)
	Adds a new ring to this geometry.
void	adjacentVertices (int atVertex, int &beforeVertex, int &afterVertex)
	Returns the indexes of the vertices before and after the given vertex index.
double	area ()
	get area of geometry using GEOS
QList< QgsGeometry * >	asGeometryCollection ()
	return contents of the geometry as a list of geometries
GEOSGeometry *	asGeos ()
	Returns a geos geomtry.
QgsMultiPoint	asMultiPoint ()
	return contents of the geometry as a multi point if wkbType is WKBMultiPoint, otherwise an empty list
QgsMultiPolygon	asMultiPolygon ()
	return contents of the geometry as a multi polygon if wkbType is WKBMultiPolygon, otherwise an empty list
QgsMultiPolyline	asMultiPolyline ()
	return contents of the geometry as a multi linestring if wkbType is WKBMultiLineString, otherwise an empty list
QgsPoint	asPoint ()
	return contents of the geometry as a point if wkbType is WKBPoint, otherwise returns [0,0]
QgsPolygon	asPolygon ()
	return contents of the geometry as a polygon if wkbType is WKBPolygon, otherwise an empty list
QgsPolyline	asPolyline ()
	return contents of the geometry as a polyline if wkbType is WKBLineString, otherwise an empty list
unsigned char *	asWkb ()
	Returns the buffer containing this geometry in WKB format.
int	avoidIntersections (QMap< QgsVectorLayer , QSet< QgsFeatureId > > ignoreFeatures=(QMap< QgsVectorLayer , QSet< QgsFeatureId > >()))
	Modifies geometry to avoid intersections with the layers specified in project properties.
QgsRectangle	boundingBox ()
	Returns the bounding box of this feature.
QgsGeometry *	buffer (double distance, int segments)
	Returns a buffer region around this geometry having the given width and with a specified number of segments used to approximate curves.
QgsGeometry *	centroid ()
	Returns the center of mass of a geometry.
double	closestSegmentWithContext (const QgsPoint &point, QgsPoint &minDistPoint, int &afterVertex, double *leftOf=0, double epsilon=DEFAULT_SEGMENT_EPSILON)
	Searches for the closest segment of geometry to the given point.
QgsPoint	closestVertex (const QgsPoint &point, int &atVertex, int &beforeVertex, int &afterVertex, double &sqrDist)
	Returns the vertex closest to the given point, the corresponding vertex index, squared distance snap point / target point and the indices of the vertices before/after.
double	closestVertexWithContext (const QgsPoint &point, int &atVertex)
	Searches for the closest vertex in this geometry to the given point.
QgsGeometry *	combine (QgsGeometry *geometry)
	Returns a geometry representing all the points in this geometry and other (a union geometry operation).
bool	contains (QgsPoint *p)
	Test for containment of a point (uses GEOS)
bool	contains (QgsGeometry *geometry)
	Test for if geometry is contained in an other (uses GEOS)
bool	convertToMultiType ()
	Converts single type geometry into multitype geometry e.g.
QgsGeometry *	convexHull ()
	Returns the smallest convex polygon that contains all the points in the geometry.
bool	crosses (QgsGeometry *geometry)
	Test for if geometry crosses an other (uses GEOS)
bool	deletePart (int partNum)
	delete part identified by the part number
bool	deleteRing (int ringNum, int partNum=0)
	delete a ring in polygon or multipolygon.
bool	deleteVertex (int atVertex)
	Deletes the vertex at the given position number and item (first number is index 0) Returns false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point), or if the number of remaining verticies in the linestring would be less than two.
QgsGeometry *	difference (QgsGeometry *geometry)
	Returns a geometry representing the points making up this geometry that do not make up other.
bool	disjoint (QgsGeometry *geometry)
	Test for if geometry is disjoint of an other (uses GEOS)
double	distance (QgsGeometry &geom)
bool	equals (QgsGeometry *geometry)
	Test for if geometry equals an other (uses GEOS)
QString	exportToGeoJSON ()
	Exports the geometry to mGeoJSON.
QString	exportToWkt ()
	Exports the geometry to mWkt.
void	fromGeos (GEOSGeometry *geos)
	Set the geometry, feeding in a geometry in GEOS format.
void	fromWkb (unsigned char *wkb, size_t length)
	Set the geometry, feeding in the buffer containing OGC Well-Known Binary and the buffer's length.
bool	insertVertex (double x, double y, int beforeVertex)
	Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted.
QgsGeometry *	interpolate (double distance)
QgsGeometry *	intersection (QgsGeometry *geometry)
	Returns a geometry representing the points shared by this geometry and other.
bool	intersects (const QgsRectangle &r)
	Test for intersection with a rectangle (uses GEOS)
bool	intersects (QgsGeometry *geometry)
	Test for intersection with a geometry (uses GEOS)
bool	isGeosEmpty ()
	check if geometry is empty using GEOS
bool	isGeosEqual (QgsGeometry &)
	compare geometries using GEOS
bool	isGeosValid ()
	check validity using GEOS
bool	isMultipart ()
	Returns true if wkb of the geometry is of WKBMulti* type.
double	length ()
	get length of geometry using GEOS
int	makeDifference (QgsGeometry *other)
	Changes this geometry such that it does not intersect the other geometry.
bool	moveVertex (double x, double y, int atVertex)
	Moves the vertex at the given position number and item (first number is index 0) to the given coordinates.
QgsGeometry &	operator= (QgsGeometry const &rhs)
	assignments will prompt a deep copy of the object
bool	overlaps (QgsGeometry *geometry)
	Test for if geometry overlaps an other (uses GEOS)
int	reshapeGeometry (const QList< QgsPoint > &reshapeWithLine)
	Replaces a part of this geometry with another line.
QgsGeometry *	simplify (double tolerance)
	Returns a simplified version of this geometry using a specified tolerance value.
int	splitGeometry (const QList< QgsPoint > &splitLine, QList< QgsGeometry * > &newGeometries, bool topological, QList< QgsPoint > &topologyTestPoints)
	Splits this geometry according to a given line.
double	sqrDistToVertexAt (QgsPoint &point, int atVertex)
	Returns the squared cartesian distance between the given point to the given vertex index (vertex at the given position number, ring and item (first number is index 0))
QgsGeometry *	symDifference (QgsGeometry *geometry)
	Returns a Geometry representing the points making up this Geometry that do not make up other.
bool	touches (QgsGeometry *geometry)
	Test for if geometry touch an other (uses GEOS)
int	transform (const QgsCoordinateTransform &ct)
	Transform this geometry as described by CoordinateTranasform ct.
int	translate (double dx, double dy)
	Translate this geometry by dx, dy.
QGis::GeometryType	type ()
	Returns type of the vector.
void	validateGeometry (QList< Error > &errors)
	Validate geometry and produce a list of geometry errors.
QgsPoint	vertexAt (int atVertex)
	Returns coordinates of a vertex.
bool	within (QgsGeometry *geometry)
	Test for if geometry is within an other (uses GEOS)
size_t	wkbSize ()
	Returns the size of the WKB in asWkb().
QGis::WkbType	wkbType ()
	Returns type of wkb (point / linestring / polygon etc.)
Static Public Member Functions
static QgsGeometry *	fromMultiPoint (const QgsMultiPoint &multipoint)
	construct geometry from a multipoint
static QgsGeometry *	fromMultiPolygon (const QgsMultiPolygon &multipoly)
	construct geometry from a multipolygon
static QgsGeometry *	fromMultiPolyline (const QgsMultiPolyline &multiline)
	construct geometry from a multipolyline
static QgsGeometry *	fromPoint (const QgsPoint &point)
	construct geometry from a point
static QgsGeometry *	fromPolygon (const QgsPolygon &polygon)
	construct geometry from a polygon
static QgsGeometry *	fromPolyline (const QgsPolyline &polyline)
	construct geometry from a polyline
static QgsGeometry *	fromRect (const QgsRectangle &rect)
	construct geometry from a rectangle
static QgsGeometry *	fromWkt (QString wkt)
	static method that creates geometry from Wkt
Private Member Functions
QgsPoint	asPoint (unsigned char *&ptr, bool hasZValue)
	return point from wkb
QgsPolygon	asPolygon (unsigned char *&ptr, bool hasZValue)
	return polygon from wkb
QgsPolyline	asPolyline (unsigned char *&ptr, bool hasZValue)
	return polyline from wkb
bool	exportGeosToWkb ()
	Converts from the GEOS geometry to the WKB geometry.
bool	exportWkbToGeos ()
	Converts from the WKB geometry to the GEOS geometry.
bool	insertVertex (double x, double y, int beforeVertex, const GEOSCoordSequence old_sequence, GEOSCoordSequence *new_sequence)
	Insert a new vertex before the given vertex index (first number is index 0) in the given GEOS Coordinate Sequence.
double	leftOf (double x, double y, double &x1, double &y1, double &x2, double &y2)
	Returns < 0 if point(x/y) is left of the line x1,y1 -> x1,y2.
int	mergeGeometriesMultiTypeSplit (QVector< GEOSGeometry * > &splitResult)
int	numberOfGeometries (GEOSGeometry *g) const
	Returns number of single geometry in a geos geometry.
int	splitLinearGeometry (GEOSGeometry splitLine, QList< QgsGeometry > &newGeometries)
	Splits line/multiline geometries.
int	splitPolygonGeometry (GEOSGeometry splitLine, QList< QgsGeometry > &newGeometries)
	Splits polygon/multipolygon geometries.
int	topologicalTestPointsSplit (const GEOSGeometry *splitLine, QList< QgsPoint > &testPoints) const
	Finds out the points that need to be tested for topological correctnes if this geometry will be split.
void	transformVertex (int &wkbPosition, const QgsCoordinateTransform &ct, bool hasZValue)
	Transforms a single vertex by ct.
void	translateVertex (int &wkbPosition, double dx, double dy, bool hasZValue)
	Translates a single vertex by dx and dy.
Static Private Member Functions
static bool	geomInDegrees (const GEOSGeometry *geom)
	Tests if geom bounding rect is within -180 <= x <= 180, -90 <= y <= 90.
static bool	geosRelOp (char(op)(const GEOSGeometry , const GEOSGeometry ), QgsGeometry a, QgsGeometry *b)
static int	lineContainedInLine (const GEOSGeometry line1, const GEOSGeometry line2)
	Tests if line1 is completely contained in line2.
static GEOSGeometry *	nodeGeometries (const GEOSGeometry splitLine, const GEOSGeometry poly)
	Nodes together a split line and a (multi-) polygon geometry in a multilinestring.
static int	pointContainedInLine (const GEOSGeometry point, const GEOSGeometry line)
	Tests if a point is on a line.
static GEOSGeometry *	reshapeLine (const GEOSGeometry origLine, const GEOSGeometry reshapeLineGeos)
	Creates a new line from an original line and a reshape line.
static GEOSGeometry *	reshapePolygon (const GEOSGeometry polygon, const GEOSGeometry reshapeLineGeos)
	Creates a new polygon replacing the part from the first to the second intersection with the reshape line.
Private Attributes
bool	mDirtyGeos
	If the geometry has been set since the last conversion to GEOS.
bool	mDirtyWkb
	If the geometry has been set since the last conversion to WKB.
unsigned char *	mGeometry
	pointer to geometry in binary WKB format This is the class' native implementation
size_t	mGeometrySize
	size of geometry
GEOSGeometry *	mGeos
	cached GEOS version of this geometry

Detailed Description

A geometry is the spatial representation of a feature.

Represents a geometry with input and output in formats specified by (at least) the Open Geospatial Consortium (WKB / Wkt), and containing various functions for geoprocessing of the geometry.

The geometry is represented internally by the OGC WKB format or as GEOS geometry. Some functions use WKB for their work, others use GEOS.

TODO: migrate completely to GEOS and only support WKB/Wkt import/export.

Author:: Brendan Morley

Definition at line 72 of file qgsgeometry.h.

Constructor & Destructor Documentation

QgsGeometry::QgsGeometry ( )

Constructor.

Definition at line 191 of file qgsgeometry.cpp.

Referenced by asGeometryCollection(), and combine().

QgsGeometry::QgsGeometry ( const QgsGeometry & rhs )

copy constructor will prompt a deep copy of the object

Definition at line 200 of file qgsgeometry.cpp.

References mGeometry, mGeometrySize, and mGeos.

QgsGeometry::~QgsGeometry ( )

Destructor.

Definition at line 224 of file qgsgeometry.cpp.

References mGeometry, and mGeos.

Member Function Documentation

int QgsGeometry::addPart ( const QList< QgsPoint > & points )

Adds a new island polygon to a multipolygon feature.

Returns:: 0 in case of success, 1 if not a multipolygon, 2 if ring is not a valid geometry, 3 if new polygon ring not disjoint with existing polygons of the feature

Definition at line 2893 of file qgsgeometry.cpp.

References convertToMultiType(), createGeosCollection(), createGeosLinearRing(), createGeosLineString(), createGeosPoint(), createGeosPolygon(), exportWkbToGeos(), isMultipart(), QGis::Line, QgsMessageLog::logMessage(), mDirtyGeos, mDirtyWkb, mGeos, QGis::Point, QGis::Polygon, QgsDebugMsg, tr, type(), and GEOSException::what().

Referenced by QgsVectorLayerEditUtils::addPart().

int QgsGeometry::addRing ( const QList< QgsPoint > & ring )

Adds a new ring to this geometry.

This makes only sense for polygon and multipolygons.

Returns:: 0 in case of success (ring added), 1 problem with geometry type, 2 ring not closed, 3 ring is not valid geometry, 4 ring not disjoint with existing rings, 5 no polygon found which contained the ring

Definition at line 2695 of file qgsgeometry.cpp.

References createGeosCollection(), createGeosLinearRing(), createGeosPolygon(), exportWkbToGeos(), QgsMessageLog::logMessage(), mDirtyGeos, mDirtyWkb, mGeos, QGis::Polygon, throwGEOSException(), tr, type(), GEOSException::what(), QGis::WKBMultiPolygon, QGis::WKBPolygon, and wkbType().

Referenced by QgsVectorLayerEditUtils::addRing().

void QgsGeometry::adjacentVertices	(	int	atVertex,
		int &	beforeVertex,
		int &	afterVertex
	)

Returns the indexes of the vertices before and after the given vertex index.

This function takes into account the following factors:

1. If the given vertex index is at the end of a linestring, the adjacent index will be -1 (for "no adjacent vertex") 2. If the given vertex index is at the end of a linear ring (such as in a polygon), the adjacent index will take into account the first vertex is equal to the last vertex (and will skip equal vertex positions).

Definition at line 1011 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyWkb, mGeometry, QgsDebugMsg, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

double QgsGeometry::area ( )

get area of geometry using GEOS

Note:: added in 1.5

Definition at line 6351 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), mDirtyGeos, and mGeos.

Referenced by QgsPalLayerSettings::checkMinimumSizeMM(), and QgsZonalStatistics::statisticsFromPreciseIntersection().

QList< QgsGeometry * > QgsGeometry::asGeometryCollection ( )

return contents of the geometry as a list of geometries

Note:: added in version 1.1

Definition at line 6638 of file qgsgeometry.cpp.

References exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, mGeos, QgsDebugMsg, and QgsGeometry().

Referenced by QgsGeometryAnalyzer::addEventLayerFeature(), and QgsGeometryAnalyzer::createOffsetGeometry().

GEOSGeometry * QgsGeometry::asGeos ( )

Returns a geos geomtry.

QgsGeometry keeps ownership, don't delete the returned object!

Note:: this method was added in version 1.1; not available in python bindings

Definition at line 629 of file qgsgeometry.cpp.

References exportWkbToGeos(), mDirtyGeos, and mGeos.

Referenced by QgsPALGeometry::getGeosGeometry(), isGeosEmpty(), isGeosValid(), QgsPalLabeling::registerDiagramFeature(), QgsPalLayerSettings::registerFeature(), QgsGeometryValidator::run(), and QgsZonalStatistics::statisticsFromMiddlePointTest().

QgsMultiPoint QgsGeometry::asMultiPoint ( )

return contents of the geometry as a multi point if wkbType is WKBMultiPoint, otherwise an empty list

Definition at line 6286 of file qgsgeometry.cpp.

References asPoint(), mGeometry, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, and wkbType().

Referenced by QgsRubberBand::addGeometry(), deletePart(), and QgsHighlight::paint().

QgsMultiPolygon QgsGeometry::asMultiPolygon ( )

return contents of the geometry as a multi polygon if wkbType is WKBMultiPolygon, otherwise an empty list

Definition at line 6329 of file qgsgeometry.cpp.

References asPolygon(), mGeometry, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, and wkbType().

Referenced by QgsRubberBand::addGeometry(), QgsVectorLayerEditUtils::addTopologicalPoints(), deletePart(), deleteRing(), QgsHighlight::paint(), QgsGeometryAnalyzer::perimeterMeasure(), and QgsGeometryValidator::run().

QgsMultiPolyline QgsGeometry::asMultiPolyline ( )

return contents of the geometry as a multi linestring if wkbType is WKBMultiLineString, otherwise an empty list

Definition at line 6307 of file qgsgeometry.cpp.

References asPolyline(), mGeometry, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, and wkbType().

Referenced by QgsRubberBand::addGeometry(), QgsVectorLayerEditUtils::addTopologicalPoints(), deletePart(), QgsLineVectorLayerDirector::makeGraph(), QgsHighlight::paint(), and QgsGeometryValidator::run().

QgsPoint QgsGeometry::asPoint ( )

return contents of the geometry as a point if wkbType is WKBPoint, otherwise returns [0,0]

Definition at line 6256 of file qgsgeometry.cpp.

References mGeometry, QGis::WKBPoint, QGis::WKBPoint25D, and wkbType().

Referenced by QgsRubberBand::addGeometry(), asMultiPoint(), QgsPointDisplacementRenderer::createDisplacementGroups(), QgsMapToolIdentify::featureDerivedAttributes(), QgsHighlight::paint(), QgsGeometryAnalyzer::simpleMeasure(), and QgsMapCanvasSnapper::snapToBackgroundLayers().

QgsPoint QgsGeometry::asPoint	(	unsigned char *&	ptr,
		bool	hasZValue
	)		`[private]`

return point from wkb

Definition at line 6173 of file qgsgeometry.cpp.

QgsPolygon QgsGeometry::asPolygon ( )

return contents of the geometry as a polygon if wkbType is WKBPolygon, otherwise an empty list

Definition at line 6276 of file qgsgeometry.cpp.

References mGeometry, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

Referenced by QgsRubberBand::addGeometry(), QgsVectorLayerEditUtils::addTopologicalPoints(), asMultiPolygon(), deleteRing(), QgsHighlight::paint(), QgsGeometryAnalyzer::perimeterMeasure(), and QgsGeometryValidator::run().

QgsPolygon QgsGeometry::asPolygon	(	unsigned char *&	ptr,
		bool	hasZValue
	)		`[private]`

return polygon from wkb

Definition at line 6214 of file qgsgeometry.cpp.

QgsPolyline QgsGeometry::asPolyline ( )

return contents of the geometry as a polyline if wkbType is WKBLineString, otherwise an empty list

Definition at line 6266 of file qgsgeometry.cpp.

References mGeometry, QGis::WKBLineString, QGis::WKBLineString25D, and wkbType().

Referenced by QgsRubberBand::addGeometry(), QgsVectorLayerEditUtils::addTopologicalPoints(), asMultiPolyline(), QgsMapToolIdentify::featureDerivedAttributes(), QgsLineVectorLayerDirector::makeGraph(), QgsHighlight::paint(), and QgsGeometryValidator::run().

QgsPolyline QgsGeometry::asPolyline	(	unsigned char *&	ptr,
		bool	hasZValue
	)		`[private]`

return polyline from wkb

Definition at line 6187 of file qgsgeometry.cpp.

unsigned char * QgsGeometry::asWkb ( )

Returns the buffer containing this geometry in WKB format.

You may wish to use in conjunction with wkbSize().

Definition at line 608 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyWkb, and mGeometry.

Referenced by QgsInterpolator::addVerticesToCache(), QgsVectorFileWriter::createFeature(), QgsGeometryAnalyzer::dissolveFeature(), QgsOgcUtils::geometryToGML(), QgsTINInterpolator::insertData(), QgsLabel::labelPoint(), QgsGeometryAnalyzer::locateAlongMeasure(), QgsGeometryAnalyzer::locateBetweenMeasures(), QgsDistanceArea::measure(), QgsDistanceArea::measurePerimeter(), QgsPointDisplacementRenderer::renderFeature(), QgsFeatureRendererV2::renderFeatureWithSymbol(), and wkbType().

int QgsGeometry::avoidIntersections ( QMap< QgsVectorLayer *, QSet< QgsFeatureId > > ignoreFeatures = ( QMap<QgsVectorLayer*, QSet<QgsFeatureId> >() ) )

Modifies geometry to avoid intersections with the layers specified in project properties.

Returns:: 0 in case of success, 1 if geometry is not of polygon type, 2 if avoid intersection would change the geometry type, 3 other error during intersection removal

Parameters:

ignoreFeatures possibility to give a list of features where intersections should be ignored (not available in python bindings)

Note:: added in 1.5

Definition at line 6791 of file qgsgeometry.cpp.

References QgsMapLayerRegistry::instance(), QgsProject::instance(), QgsMapLayerRegistry::mapLayer(), QGis::Polygon, QgsProject::readListEntry(), QgsVectorLayer::removePolygonIntersections(), type(), and wkbType().

QgsRectangle QgsGeometry::boundingBox ( )

QgsGeometry * QgsGeometry::buffer	(	double	distance,
		int	segments
	)

Returns a buffer region around this geometry having the given width and with a specified number of segments used to approximate curves.

Definition at line 6422 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, and mGeos.

Referenced by QgsGeometryAnalyzer::bufferFeature(), and fcnBuffer().

QgsGeometry * QgsGeometry::centroid ( )

Returns the center of mass of a geometry.

Note:: for line based geometries, the center point of the line is returned, and for point based geometries, the point itself is returned

Definition at line 6457 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, and mGeos.

Referenced by QgsGeometryAnalyzer::centroidFeature(), and fcnCentroid().

double QgsGeometry::closestSegmentWithContext	(	const QgsPoint &	point,
		QgsPoint &	minDistPoint,
		int &	afterVertex,
		double *	leftOf = `0`,
		double	epsilon = `DEFAULT_SEGMENT_EPSILON`
	)

Searches for the closest segment of geometry to the given point.

Parameters:

point	Specifies the point for search
minDistPoint	Receives the nearest point on the segment
afterVertex	Receives index of the vertex after the closest segment. The vertex before the closest segment is always afterVertex - 1
leftOf	Out: Returns if the point lies on the left of right side of the segment ( < 0 means left, > 0 means right )
epsilon	epsilon for segment snapping (added in 1.8)

Returns:: The squared cartesian distance is also returned in sqrDist, negative number on error

Definition at line 2450 of file qgsgeometry.cpp.

References exportGeosToWkb(), leftOf(), MathUtils::max(), mDirtyWkb, mGeometry, QgsDebugMsg, QgsPoint::sqrDistToSegment(), QgsPoint::toString(), QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, wkbType(), QGis::WKBUnknown, QgsPoint::x(), and QgsPoint::y().

Referenced by QgsGeometryAnalyzer::createPointOffset(), and QgsVectorLayer::snapToGeometry().

QgsPoint QgsGeometry::closestVertex	(	const QgsPoint &	point,
		int &	atVertex,
		int &	beforeVertex,
		int &	afterVertex,
		double &	sqrDist
	)

Returns the vertex closest to the given point, the corresponding vertex index, squared distance snap point / target point and the indices of the vertices before/after.

The vertices before/after are -1 if not present

Definition at line 733 of file qgsgeometry.cpp.

References exportGeosToWkb(), MathUtils::max(), mDirtyWkb, mGeometry, QgsDebugMsg, QgsPoint::sqrDist(), QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

Referenced by QgsVectorLayer::snapToGeometry().

double QgsGeometry::closestVertexWithContext	(	const QgsPoint &	point,
		int &	atVertex
	)

Searches for the closest vertex in this geometry to the given point.

Parameters:

point	Specifiest the point for search
atVertex	Receives index of the closest vertex

Returns:: The squared cartesian distance is also returned in sqrDist, negative number on error

Definition at line 2395 of file qgsgeometry.cpp.

References exportWkbToGeos(), QgsMessageLog::logMessage(), MathUtils::max(), mDirtyGeos, mGeos, QgsPoint::sqrDist(), tr, and GEOSException::what().

QgsGeometry * QgsGeometry::combine ( QgsGeometry * geometry )

Returns a geometry representing all the points in this geometry and other (a union geometry operation).

Note:: this operation is not called union since its a reserved word in C++.

Definition at line 6544 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), QGis::Line, mDirtyGeos, mGeos, QgsGeometry(), and type().

Referenced by QgsGeometryAnalyzer::bufferFeature(), QgsGeometryAnalyzer::convexFeature(), QgsGeometryAnalyzer::dissolveFeature(), and fcnCombine().

bool QgsGeometry::contains ( QgsPoint * p )

Test for containment of a point (uses GEOS)

Definition at line 3889 of file qgsgeometry.cpp.

References createGeosPoint(), exportWkbToGeos(), QgsMessageLog::logMessage(), mGeos, QgsDebugMsg, tr, and GEOSException::what().

Referenced by fcnContains(), and QgsPalLayerSettings::registerFeature().

bool QgsGeometry::contains ( QgsGeometry * geometry )

Test for if geometry is contained in an other (uses GEOS)

Note:: added in 1.5

Definition at line 3941 of file qgsgeometry.cpp.

References geosRelOp().

bool QgsGeometry::convertToMultiType ( )

Converts single type geometry into multitype geometry e.g.

a polygon into a multipolygon geometry with one polygon

Returns:: true in case of success and false else

Definition at line 5192 of file qgsgeometry.cpp.

References QgsApplication::endian(), mDirtyGeos, mGeometry, mGeometrySize, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, wkbType(), and QGis::WKBUnknown.

Referenced by addPart(), QgsVectorFileWriter::createFeature(), and makeDifference().

QgsGeometry * QgsGeometry::convexHull ( )

Returns the smallest convex polygon that contains all the points in the geometry.

Definition at line 6474 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, and mGeos.

Referenced by QgsGeometryAnalyzer::convexFeature(), QgsGeometryAnalyzer::convexHull(), and fcnConvexHull().

bool QgsGeometry::crosses ( QgsGeometry * geometry )

Test for if geometry crosses an other (uses GEOS)

Note:: added in 1.5

Definition at line 3971 of file qgsgeometry.cpp.

References geosRelOp().

Referenced by fcnCrosses().

bool QgsGeometry::deletePart ( int partNum )

delete part identified by the part number

Returns:: true on success

Note:: added in version 1.2

Definition at line 6728 of file qgsgeometry.cpp.

References asMultiPoint(), asMultiPolygon(), asMultiPolyline(), fromMultiPoint(), fromMultiPolygon(), fromMultiPolyline(), QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, and wkbType().

bool QgsGeometry::deleteRing	(	int	ringNum,
		int	partNum = `0`
	)

delete a ring in polygon or multipolygon.

Ring 0 is outer ring and can't be deleted.

Returns:: true on success

Note:: added in version 1.2

Definition at line 6678 of file qgsgeometry.cpp.

References asMultiPolygon(), asPolygon(), fromMultiPolygon(), fromPolygon(), QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

bool QgsGeometry::deleteVertex ( int atVertex )

Deletes the vertex at the given position number and item (first number is index 0) Returns false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point), or if the number of remaining verticies in the linestring would be less than two.

It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?)

Definition at line 1541 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyGeos, mDirtyWkb, mGeometry, mGeometrySize, QgsDebugMsg, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBNoGeometry, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, wkbType(), and QGis::WKBUnknown.

Referenced by QgsVectorLayerEditUtils::deleteVertex().

QgsGeometry * QgsGeometry::difference ( QgsGeometry * geometry )

Returns a geometry representing the points making up this geometry that do not make up other.

Definition at line 6582 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, and mGeos.

Referenced by fcnDifference().

bool QgsGeometry::disjoint ( QgsGeometry * geometry )

Test for if geometry is disjoint of an other (uses GEOS)

Note:: added in 1.5

Definition at line 3946 of file qgsgeometry.cpp.

References geosRelOp().

Referenced by fcnDisjoint().

double QgsGeometry::distance ( QgsGeometry & geom )

Definition at line 6396 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), mDirtyGeos, and mGeos.

Referenced by fcnDistance().

bool QgsGeometry::equals ( QgsGeometry * geometry )

Test for if geometry equals an other (uses GEOS)

Note:: added in 1.5

Definition at line 3951 of file qgsgeometry.cpp.

References geosRelOp().

bool QgsGeometry::exportGeosToWkb ( ) [private]

Converts from the GEOS geometry to the WKB geometry.

Returns:: true in case of success and false else

Definition at line 4797 of file qgsgeometry.cpp.

References QgsApplication::endian(), getNumGeosPoints(), mDirtyWkb, mGeometry, mGeometrySize, mGeos, QgsDebugMsg, QGis::WKBLineString, QGis::WKBMultiLineString, QGis::WKBMultiPoint, QGis::WKBMultiPolygon, QGis::WKBPoint, QGis::WKBPolygon, and wkbType().

Referenced by adjacentVertices(), asWkb(), boundingBox(), closestSegmentWithContext(), closestVertex(), deleteVertex(), exportToGeoJSON(), exportToWkt(), insertVertex(), isMultipart(), moveVertex(), splitGeometry(), transform(), translate(), type(), vertexAt(), and wkbSize().

QString QgsGeometry::exportToGeoJSON ( )

Exports the geometry to mGeoJSON.

Returns:: true in case of success and false else

Note:: added in 1.8; python binding added in 1.9

Definition at line 4256 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyWkb, mGeometry, QgsDebugMsg, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

QString QgsGeometry::exportToWkt ( )

Exports the geometry to mWkt.

Returns:: true in case of success and false else

Definition at line 3976 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyWkb, mGeometry, QgsDebugMsg, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, wkbSize(), and wkbType().

Referenced by QgsOfflineEditing::committedGeometriesChanges(), and fcnGeomToWKT().

bool QgsGeometry::exportWkbToGeos ( ) [private]

Converts from the WKB geometry to the GEOS geometry.

Returns:: true in case of success and false else

Definition at line 4547 of file qgsgeometry.cpp.

References CATCH_GEOS, createGeosCollection(), createGeosLinearRing(), createGeosLineString(), createGeosPoint(), createGeosPolygon(), mDirtyGeos, mGeometry, mGeos, QgsDebugMsgLevel, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, and QGis::WKBPolygon25D.

Referenced by addPart(), addRing(), area(), asGeometryCollection(), asGeos(), buffer(), centroid(), closestVertexWithContext(), combine(), contains(), convexHull(), difference(), distance(), geosRelOp(), interpolate(), intersection(), intersects(), length(), makeDifference(), mergeGeometriesMultiTypeSplit(), reshapeGeometry(), simplify(), splitGeometry(), splitLinearGeometry(), splitPolygonGeometry(), and symDifference().

void QgsGeometry::fromGeos ( GEOSGeometry * geos )

Set the geometry, feeding in a geometry in GEOS format.

This class will take ownership of the buffer.

Note:: not available in python bindings

Definition at line 712 of file qgsgeometry.cpp.

References mDirtyGeos, mDirtyWkb, mGeometry, and mGeos.

Referenced by QgsGeometryAnalyzer::createOffsetGeometry(), and fromGeosGeom().

QgsGeometry * QgsGeometry::fromMultiPoint ( const QgsMultiPoint & multipoint ) [static]

construct geometry from a multipoint

Definition at line 467 of file qgsgeometry.cpp.

References createGeosCollection(), createGeosPoint(), fromGeosGeom(), QgsMessageLog::logMessage(), tr, and GEOSException::what().

Referenced by QgsRubberBand::asGeometry(), deletePart(), and QgsGeometryAnalyzer::locateAlongMeasure().

QgsGeometry * QgsGeometry::fromMultiPolygon ( const QgsMultiPolygon & multipoly ) [static]

construct geometry from a multipolygon

Definition at line 513 of file qgsgeometry.cpp.

References createGeosCollection(), createGeosPolygon(), fromGeosGeom(), QgsMessageLog::logMessage(), tr, and GEOSException::what().

Referenced by deletePart(), and deleteRing().

QgsGeometry * QgsGeometry::fromMultiPolyline ( const QgsMultiPolyline & multiline ) [static]

construct geometry from a multipolyline

Definition at line 491 of file qgsgeometry.cpp.

References createGeosCollection(), createGeosLineString(), fromGeosGeom(), QgsMessageLog::logMessage(), tr, and GEOSException::what().

Referenced by QgsRubberBand::asGeometry(), deletePart(), and QgsGeometryAnalyzer::locateBetweenMeasures().

QgsGeometry * QgsGeometry::fromPoint ( const QgsPoint & point ) [static]

construct geometry from a point

Definition at line 452 of file qgsgeometry.cpp.

References createGeosPoint(), and fromGeosGeom().

QgsGeometry * QgsGeometry::fromPolygon ( const QgsPolygon & polygon ) [static]

construct geometry from a polygon

Definition at line 462 of file qgsgeometry.cpp.

References createGeosPolygon(), and fromGeosGeom().

Referenced by QgsRubberBand::asGeometry(), deleteRing(), and fromRect().

QgsGeometry * QgsGeometry::fromPolyline ( const QgsPolyline & polyline ) [static]

construct geometry from a polyline

Definition at line 457 of file qgsgeometry.cpp.

References createGeosLineString(), and fromGeosGeom().

Referenced by QgsRubberBand::asGeometry(), QgsGeometryAnalyzer::perimeterMeasure(), and QgsMapCanvasSnapper::snapToBackgroundLayers().

QgsGeometry * QgsGeometry::fromRect ( const QgsRectangle & rect ) [static]

construct geometry from a rectangle

Definition at line 538 of file qgsgeometry.cpp.

References fromPolygon(), QgsRectangle::xMaximum(), QgsRectangle::xMinimum(), QgsRectangle::yMaximum(), and QgsRectangle::yMinimum().

Referenced by QgsGml::endElement(), QgsGeometryAnalyzer::extent(), QgsOgcUtils::geometryFromGML(), intersects(), QgsPalLabeling::prepareLayer(), and QgsZonalStatistics::statisticsFromPreciseIntersection().

void QgsGeometry::fromWkb	(	unsigned char *	wkb,
		size_t	length
	)

Set the geometry, feeding in the buffer containing OGC Well-Known Binary and the buffer's length.

This class will take ownership of the buffer.

Definition at line 587 of file qgsgeometry.cpp.

References length(), mDirtyGeos, mDirtyWkb, mGeometry, mGeometrySize, and mGeos.

Referenced by QgsOgcUtils::geometryFromGMLLineString(), QgsOgcUtils::geometryFromGMLMultiLineString(), QgsOgcUtils::geometryFromGMLMultiPoint(), QgsOgcUtils::geometryFromGMLMultiPolygon(), QgsOgcUtils::geometryFromGMLPoint(), QgsOgcUtils::geometryFromGMLPolygon(), and QgsFeature::setGeometryAndOwnership().

QgsGeometry * QgsGeometry::fromWkt ( QString wkt ) [static]

static method that creates geometry from Wkt

Definition at line 432 of file qgsgeometry.cpp.

References fromGeosGeom(), QgsMessageLog::logMessage(), tr, and GEOSException::what().

Referenced by QgsOfflineEditing::applyGeometryChanges(), QgsOgcUtils::expressionFunctionToOgcFilter(), and fcnGeomFromWKT().

bool QgsGeometry::geomInDegrees ( const GEOSGeometry * geom ) [static, private]

Tests if geom bounding rect is within -180 <= x <= 180, -90 <= y <= 90.

Other methods may use more accurate tolerances if this is true

Definition at line 6027 of file qgsgeometry.cpp.

Referenced by lineContainedInLine(), and pointContainedInLine().

bool QgsGeometry::geosRelOp	(	char()(const GEOSGeometry , const GEOSGeometry *)	op,
		QgsGeometry *	a,
		QgsGeometry *	b
	)		`[static, private]`

Definition at line 3920 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), mGeos, and QgsDebugMsg.

Referenced by contains(), crosses(), disjoint(), equals(), isGeosEqual(), overlaps(), touches(), and within().

bool QgsGeometry::insertVertex	(	double	x,
		double	y,
		int	beforeVertex
	)

Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted.

Returns false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point). It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?)

Definition at line 1870 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyGeos, mDirtyWkb, mGeometry, mGeometrySize, QgsDebugMsg, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBNoGeometry, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, wkbType(), and QGis::WKBUnknown.

Referenced by QgsVectorLayerEditUtils::insertVertex().

bool QgsGeometry::insertVertex	(	double	x,
		double	y,
		int	beforeVertex,
		const GEOSCoordSequence *	old_sequence,
		GEOSCoordSequence **	new_sequence
	)		`[private]`

Insert a new vertex before the given vertex index (first number is index 0) in the given GEOS Coordinate Sequence.

If the requested vertex number is greater than the last actual vertex, it is assumed that the vertex is to be appended instead of inserted.

Parameters:

x	x coordinate
y	y coordinate
beforeVertex	insert before vertex with this index
old_sequence	The sequence to update (The caller remains the owner).
new_sequence	The updated sequence (The caller becomes the owner if the function returns true). Returns false if beforeVertex does not correspond to a valid vertex number on the Coordinate Sequence.

Definition at line 1240 of file qgsgeometry.cpp.

QgsGeometry * QgsGeometry::interpolate ( double distance )

Definition at line 6492 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), QgsMessageLog::logMessage(), mDirtyGeos, mGeos, and tr.

QgsGeometry * QgsGeometry::intersection ( QgsGeometry * geometry )

Returns a geometry representing the points shared by this geometry and other.

Definition at line 6515 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, and mGeos.

Referenced by fcnIntersection(), QgsOverlayAnalyzer::intersectFeature(), QgsPalLayerSettings::registerFeature(), QgsMapCanvasSnapper::snapToBackgroundLayers(), and QgsZonalStatistics::statisticsFromPreciseIntersection().

bool QgsGeometry::intersects ( const QgsRectangle & r )

Test for intersection with a rectangle (uses GEOS)

Definition at line 3861 of file qgsgeometry.cpp.

References fromRect().

Referenced by fcnBbox(), fcnIntersects(), and QgsOverlayAnalyzer::intersectFeature().

bool QgsGeometry::intersects ( QgsGeometry * geometry )

Test for intersection with a geometry (uses GEOS)

Definition at line 3869 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), mGeos, and QgsDebugMsg.

bool QgsGeometry::isGeosEmpty ( )

check if geometry is empty using GEOS

Note:: added in 1.5

Definition at line 6870 of file qgsgeometry.cpp.

References asGeos(), QgsMessageLog::logMessage(), tr, and GEOSException::what().

bool QgsGeometry::isGeosEqual ( QgsGeometry & g )

compare geometries using GEOS

Note:: added in 1.5

Definition at line 6865 of file qgsgeometry.cpp.

References geosRelOp().

Referenced by QgsVectorLayer::updateFeature().

bool QgsGeometry::isGeosValid ( )

check validity using GEOS

Note:: added in 1.5

Definition at line 6847 of file qgsgeometry.cpp.

References asGeos(), QgsMessageLog::logMessage(), tr, and GEOSException::what().

bool QgsGeometry::isMultipart ( )

Returns true if wkb of the geometry is of WKBMulti* type.

Definition at line 691 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyWkb, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, and wkbType().

Referenced by addPart(), QgsGeometryAnalyzer::createOffsetGeometry(), makeDifference(), and QgsGeometryAnalyzer::perimeterMeasure().

double QgsGeometry::leftOf	(	double	x,
		double	y,
		double &	x1,
		double &	y1,
		double &	x2,
		double &	y2
	)		`[private]`

Returns < 0 if point(x/y) is left of the line x1,y1 -> x1,y2.

Definition at line 6888 of file qgsgeometry.cpp.

Referenced by closestSegmentWithContext().

double QgsGeometry::length ( )

get length of geometry using GEOS

Note:: added in 1.5

Definition at line 6374 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), mDirtyGeos, and mGeos.

Referenced by QgsPalLayerSettings::checkMinimumSizeMM(), and fromWkb().

int QgsGeometry::lineContainedInLine	(	const GEOSGeometry *	line1,
		const GEOSGeometry *	line2
	)		`[static, private]`

Tests if line1 is completely contained in line2.

This method works with a very small buffer around line2 and therefore is less prone to numerical errors as the corresponding geos method

Definition at line 5960 of file qgsgeometry.cpp.

References DEFAULT_QUADRANT_SEGMENTS, and geomInDegrees().

Referenced by reshapeLine().

int QgsGeometry::makeDifference ( QgsGeometry * other )

Changes this geometry such that it does not intersect the other geometry.

Parameters:

other geometry that should not be intersect

Returns:: 0 in case of success

Definition at line 3515 of file qgsgeometry.cpp.

References CATCH_GEOS, convertToMultiType(), exportWkbToGeos(), isMultipart(), mDirtyGeos, mDirtyWkb, and mGeos.

Referenced by QgsVectorLayer::removePolygonIntersections().

int QgsGeometry::mergeGeometriesMultiTypeSplit ( QVector< GEOSGeometry * > & splitResult ) [private]

Definition at line 6088 of file qgsgeometry.cpp.

References createGeosCollection(), exportWkbToGeos(), mDirtyGeos, and mGeos.

Referenced by splitLinearGeometry(), and splitPolygonGeometry().

bool QgsGeometry::moveVertex	(	double	x,
		double	y,
		int	atVertex
	)

Moves the vertex at the given position number and item (first number is index 0) to the given coordinates.

Returns false if atVertex does not correspond to a valid vertex on this geometry

Definition at line 1292 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyGeos, mDirtyWkb, mGeometry, QgsDebugMsg, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

Referenced by QgsVectorLayerEditUtils::moveVertex().

GEOSGeometry * QgsGeometry::nodeGeometries	(	const GEOSGeometry *	splitLine,
		const GEOSGeometry *	poly
	)		`[static, private]`

Nodes together a split line and a (multi-) polygon geometry in a multilinestring.

Returns:: the noded multiline geometry or 0 in case of error. The calling function takes ownership of the node geometry

Definition at line 5935 of file qgsgeometry.cpp.

Referenced by reshapeLine(), and splitPolygonGeometry().

int QgsGeometry::numberOfGeometries ( GEOSGeometry * g ) const [private]

Returns number of single geometry in a geos geometry.

Is save for geos 2 and 3

Definition at line 6071 of file qgsgeometry.cpp.

Referenced by splitPolygonGeometry().

QgsGeometry & QgsGeometry::operator= ( QgsGeometry const & rhs )

assignments will prompt a deep copy of the object

Note:: not available in python bindings

Definition at line 554 of file qgsgeometry.cpp.

References mDirtyGeos, mDirtyWkb, mGeometry, mGeometrySize, and mGeos.

bool QgsGeometry::overlaps ( QgsGeometry * geometry )

Test for if geometry overlaps an other (uses GEOS)

Note:: added in 1.5

Definition at line 3961 of file qgsgeometry.cpp.

References geosRelOp().

Referenced by fcnOverlaps().

int QgsGeometry::pointContainedInLine	(	const GEOSGeometry *	point,
		const GEOSGeometry *	line
	)		`[static, private]`

Tests if a point is on a line.

This method works with a very small buffer and is thus less prone to numerical problems as the direct geos functions.

Parameters:

point	the point to test
line	line to test

Returns:: 0 not contained, 1 if contained, <0 in case of error

Definition at line 5999 of file qgsgeometry.cpp.

References geomInDegrees().

Referenced by reshapeLine().

int QgsGeometry::reshapeGeometry ( const QList< QgsPoint > & reshapeWithLine )

Replaces a part of this geometry with another line.

Returns:: 0 in case of success

Note:: : this function was added in version 1.3

Definition at line 3386 of file qgsgeometry.cpp.

References createGeosLineString(), exportWkbToGeos(), QGis::Line, mDirtyGeos, mDirtyWkb, mGeos, QGis::Point, reshapeLine(), reshapePolygon(), and type().

GEOSGeometry * QgsGeometry::reshapeLine	(	const GEOSGeometry *	origLine,
		const GEOSGeometry *	reshapeLineGeos
	)		`[static, private]`

Creates a new line from an original line and a reshape line.

The part of the input line from the first to the last intersection with the reshape line will be replaced. The calling function takes ownership of the result.

Parameters:

origLine	the original line
reshapeLineGeos	the reshape line

Returns:: the reshaped line or 0 in case of error

Definition at line 5631 of file qgsgeometry.cpp.

References createGeosPoint(), lineContainedInLine(), QgsMessageLog::logMessage(), nodeGeometries(), pointContainedInLine(), tr, and GEOSException::what().

Referenced by reshapeGeometry(), and reshapePolygon().

GEOSGeometry * QgsGeometry::reshapePolygon	(	const GEOSGeometry *	polygon,
		const GEOSGeometry *	reshapeLineGeos
	)		`[static, private]`

Creates a new polygon replacing the part from the first to the second intersection with the reshape line.

As a polygon ring is always closed, the method keeps the longer part of the existing boundary

Parameters:

polygon	geometry to reshape
reshapeLineGeos	the reshape line

Returns:: the reshaped polygon or 0 in case of error

Definition at line 5498 of file qgsgeometry.cpp.

References QgsMessageLog::logMessage(), reshapeLine(), tr, and GEOSException::what().

Referenced by reshapeGeometry().

QgsGeometry * QgsGeometry::simplify ( double tolerance )

Returns a simplified version of this geometry using a specified tolerance value.

Definition at line 6440 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, and mGeos.

Referenced by QgsGeometryAnalyzer::simplifyFeature().

int QgsGeometry::splitGeometry	(	const QList< QgsPoint > &	splitLine,
		QList< QgsGeometry * > &	newGeometries,
		bool	topological,
		QList< QgsPoint > &	topologyTestPoints
	)

Splits this geometry according to a given line.

Note that the geometry is only split once. If there are several intersections between geometry and splitLine, only the first one is considered.

Parameters:

	splitLine	the line that splits the geometry
[out]	newGeometries	list of new geometries that have been created with the split
	topological	true if topological editing is enabled
[out]	topologyTestPoints	points that need to be tested for topological completeness in the dataset

Returns:: 0 in case of success, 1 if geometry has not been split, error else

Definition at line 3307 of file qgsgeometry.cpp.

References CATCH_GEOS, createGeosLineString(), exportGeosToWkb(), exportWkbToGeos(), QGis::Line, mDirtyGeos, mDirtyWkb, mGeos, QGis::Point, QGis::Polygon, splitLinearGeometry(), splitPolygonGeometry(), topologicalTestPointsSplit(), and type().

Referenced by QgsVectorLayerEditUtils::splitFeatures().

int QgsGeometry::splitLinearGeometry	(	GEOSGeometry *	splitLine,
		QList< QgsGeometry * > &	newGeometries
	)		`[private]`

Splits line/multiline geometries.

Parameters:

splitLine	the line that splits the feature
newGeometries	new geometries if splitting was successful

Returns:: 0 in case of success, 1 if geometry has not been split, error else

Definition at line 5309 of file qgsgeometry.cpp.

References exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, mDirtyWkb, mergeGeometriesMultiTypeSplit(), and mGeos.

Referenced by splitGeometry().

int QgsGeometry::splitPolygonGeometry	(	GEOSGeometry *	splitLine,
		QList< QgsGeometry * > &	newGeometries
	)		`[private]`

Splits polygon/multipolygon geometries.

Returns:: 0 in case of success, 1 if geometry has not been split, error else

Definition at line 5374 of file qgsgeometry.cpp.

References exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, mDirtyWkb, mergeGeometriesMultiTypeSplit(), mGeos, nodeGeometries(), numberOfGeometries(), and QgsDebugMsg.

Referenced by splitGeometry().

double QgsGeometry::sqrDistToVertexAt	(	QgsPoint &	point,
		int	atVertex
	)

Returns the squared cartesian distance between the given point to the given vertex index (vertex at the given position number, ring and item (first number is index 0))

Definition at line 2378 of file qgsgeometry.cpp.

References MathUtils::max(), QgsDebugMsg, QgsPoint::sqrDist(), QgsPoint::toString(), and vertexAt().

QgsGeometry * QgsGeometry::symDifference ( QgsGeometry * geometry )

Returns a Geometry representing the points making up this Geometry that do not make up other.

Definition at line 6610 of file qgsgeometry.cpp.

References CATCH_GEOS, exportWkbToGeos(), fromGeosGeom(), mDirtyGeos, and mGeos.

Referenced by fcnSymDifference().

int QgsGeometry::topologicalTestPointsSplit	(	const GEOSGeometry *	splitLine,
		QList< QgsPoint > &	testPoints
	)		const `[private]`

Finds out the points that need to be tested for topological correctnes if this geometry will be split.

Returns:: 0 in case of success

Definition at line 5877 of file qgsgeometry.cpp.

References mGeos.

Referenced by splitGeometry().

bool QgsGeometry::touches ( QgsGeometry * geometry )

Test for if geometry touch an other (uses GEOS)

Note:: added in 1.5

Definition at line 3956 of file qgsgeometry.cpp.

References geosRelOp().

Referenced by fcnTouches().

int QgsGeometry::transform ( const QgsCoordinateTransform & ct )

Transform this geometry as described by CoordinateTranasform ct.

Returns:: 0 in case of success

Definition at line 3181 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyGeos, mDirtyWkb, mGeometry, QgsDebugMsg, transformVertex(), QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

Referenced by QgsVectorFileWriter::exportFeaturesSymbolLevels(), QgsVectorLayerImport::importLayer(), QgsAtlasComposition::prepareForFeature(), QgsHighlight::QgsHighlight(), QgsPalLabeling::registerDiagramFeature(), QgsPalLayerSettings::registerFeature(), and QgsVectorFileWriter::writeAsVectorFormat().

void QgsGeometry::transformVertex	(	int &	wkbPosition,
		const QgsCoordinateTransform &	ct,
		bool	hasZValue
	)		`[private]`

Transforms a single vertex by ct.

Parameters:

wkbPosition	position in wkb array. Is increased automatically by the function
ct	the QgsCoordinateTransform
hasZValue	25D type?

Definition at line 5284 of file qgsgeometry.cpp.

References mGeometry, and QgsCoordinateTransform::transformInPlace().

Referenced by transform().

int QgsGeometry::translate	(	double	dx,
		double	dy
	)

Translate this geometry by dx, dy.

Returns:: 0 in case of success

Definition at line 3055 of file qgsgeometry.cpp.

References exportGeosToWkb(), mDirtyGeos, mDirtyWkb, mGeometry, QgsDebugMsg, translateVertex(), QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().

Referenced by QgsVectorLayerEditUtils::translateFeature().

void QgsGeometry::translateVertex	(	int &	wkbPosition,
		double	dx,
		double	dy,
		bool	hasZValue
	)		`[private]`

Translates a single vertex by dx and dy.

Parameters:

wkbPosition	position in wkb array. Is increased automatically by the function
dx	translation of x-coordinate
dy	translation of y-coordinate
hasZValue	25D type?

Definition at line 5262 of file qgsgeometry.cpp.

References mGeometry.

Referenced by translate().

QGis::GeometryType QgsGeometry::type ( )

Returns type of the vector.

Definition at line 658 of file qgsgeometry.cpp.

References exportGeosToWkb(), QGis::Line, mDirtyWkb, QGis::Point, QGis::Polygon, QGis::UnknownGeometry, QGis::WKBLineString, QGis::WKBLineString25D, QGis::WKBMultiLineString, QGis::WKBMultiLineString25D, QGis::WKBMultiPoint, QGis::WKBMultiPoint25D, QGis::WKBMultiPolygon, QGis::WKBMultiPolygon25D, QGis::WKBPoint, QGis::WKBPoint25D, QGis::WKBPolygon, QGis::WKBPolygon25D, and wkbType().